These assholes had a production problem that was all but halting there production line. I worked as a metal saw operator, and eveytime these dickheads fucked something up on the line I had to re-cut it.
We worked peice rate and DID NOT get paid for mistakes.
But if you draw SSDI and live in the Bay Area you do get paid for mistakes, dontcha, I do, been fucking this up for 7+ years and still get $1,400.00 a month...I'll bet that pisses you off, lol....talk you dumbass.
WORKING FOR "RATE" WILL MAKE YOU DO IT RIGHT THE FIRST TIME, AND AFTER YOU GET YOUR FIRST CHECK, YOU WILL DO IT RIGHT EVERYTIME....TIME IS MONEY, AND JASON I HAVE WASTED ENOUGH OF OURS.
The problem they had was low air pressure on the assemble line, and they blamed it on an old "LeRoi" air compressor. The compressor was dirty and leaked oil and they thought that "it" was at fault.
What they failed to realize was, they were working the compressor to death and not maintaining it, and that was why it leaked oil, and because it leaked oil all over itself and the dust settled on it after work it looked like a "hunk of shit".
LeRoi is one of the best compressors on the market and this was a "top of the line" when it was purchased, it needed to be maintained.
The company was going to buy a new compressor and they "thought" it would solve the problem.
The questions they needed to ask is "why" isn't the compressor keeping up?
Did this problem always exist...NO.
They could not have been more wrong, these were pencil pushing fucking neddle-dicked, pin-heads.
I told Ron Davis, the plant manager, that the problem was the leaking pneumatic tools and lines on the assembly line, he looked at me as if I was nuts, and he knew I was smart, but could not comprehend how I knew this.
Because instead of going out and hosing down beers and smoking weed and snorting speed at lunch, I stayed at the shop and planned my after noon work as not to have my head stuck in my ass.
When it was quiet, I could here the air leaks and could tell how many times the compressor turned on and off when there was NO production, let alone when 70+ plus employees were working.
FIX THE LEAKS IN THE SCREW GUNS AND THE HOSES THAT HAD BEEN RUN OVER BY THE 40,000 POUND FORKLIFT AND THE COMPRESSOR WILL HANDLE THE LOAD, JUST LIKE IT DID WHEN IT WAS NEW AND THE HOSES GUNS WERE NEW....THEY DIDN'T LEAK.
What I needed to do was find a way to prove to this asshole that I was right, hmmmm?
I tried to talk to him and he thought, WHAT DOES THIS FAG KNOW, I'M THE MANAGER.
THE REASON YOU ARE A SUPERVISOR IS BECAUSE YOU ARE YOU ARE NOT SMART ENOUGH TO ACTUALLY WORK AT ANYTHING BESIDES KISSING CORPORATE ASSES.
After weeks of re-cutting the mistakes from the assembly line, I was feed up and ready to quit.
But Jack is not going out like this, I'm going to show this asswipe what the "real" problem is...besides him being a dumb-assed nigger.
After work on the day I was ready to quit I took the main airline off the compressor and put a 4 ounce bottle of "LOCK-TITE" in the air line that feed the assembly line. Everyone was so glad to be done at the end of the day, they left all the tools plugged in to the air lines and just left. As the compressors tank leaked all the air off throughh the guns the "LOCK-TITE" got into the guns.
Lock-tite, unlike glue, seals in the absence of air.
So when the LOCK-TITE got into the inside of the screw guns it locked all of them up.
The next morning none of the tools worked on the line...but the compressor did.
Ron Davis knew I was the only one in the plant the night before and came to me and asked, "What did you do to the line."
I looked at him like the dickheads of the Bay Area look at me when I ask them about the implants....I looked at him with a bewildered look and shrugged my shoulders as if to say...WHAT?
They had the money to replace the compressor, but that was not the problem, the leaking equipment was. They went down to the air tool supplier and bought all new screw guns and hoses for the line and fired production up....guess what, NO LEAKS.!!!!!!!!!
Production was flying and Ron Davis was watching the products fly off the line. He never came over and said shit to me. Remember I was a metal saw operator and I was the guy that started the production. I kept the line supplied with just enough parts to keep production moving and at lunch I walked out and went to the bar, then went home, drunk, and never went back to work...FUCK THAT ARROGANT PUNK.
Ron Davis called me for 3 days asking me to come back to work and I told him to FUCK OFF.
He knew so much about running the company....RUN THE MOTHER FUCKER, DICKHEAD.
The week before I quit my check was $1,113.00 take home pay.
IT IS ABOUT RESPECT YOU FUCKING ARROGANT ASSHOLE, NOT MONEY.!!!!!
WHEN I TALK, YOU BETTER LISTEN...I TALK TO BE HEARD.
AND IT SHOULD BE OBVIOUS TO EVERYONE THAT I LISTENED, TO OR FOR, THE PROBLEM AND THEN THOUGHT ABOUT A SOLUTION.
GUESS WHAT?
I WAS RIGHT....AGAIN.
PAY MY SSDI CHECK YOU FUCKING ASSHOLES,
OR FIND ME A JOB, I'LL BE AT THE BAR, LMFAO.
REMEMBER THIS FROM THE FRAM COMMERCIAL:
YOU CAN PAY ME NOW...OR YOU CAN PAY ME LATER.
I FUCKING LOVE DOING THIS SHIT WHEN SOMEONE PISSES ME THE FUCK OFF, AND YOU THOUGHT I WAS ARROGANT.
YOU SHOULD HAVE HAD ME WORK FOR YOU...THINK I'M STUPID.??
SOME OF THE SMARTEST PEOPLE IN THE WORLD LIVE IN THE BAY AREA,
RIGHT MICHAEL FELL.
I KNOW DUMMY, WHY DO YOU THINK I CAME HERE.
I MAY BE ONE OF THE SMARTEST...OR ONE OF THE DUMBEST.
WHAT DO YOU THINK.??
I'M DEFINATELY THEE MOST ARROGANT.!!!!!
YOU ASSHOLES IN THE BAY AREA THOUGHT I WAS ARROGANT BEFORE....I WARNED YOUR ASSES.
THIS IS FUCKING ARROGANCE AND YOU STARTED IT.
We worked peice rate and DID NOT get paid for mistakes.
But if you draw SSDI and live in the Bay Area you do get paid for mistakes, dontcha, I do, been fucking this up for 7+ years and still get $1,400.00 a month...I'll bet that pisses you off, lol....talk you dumbass.
WORKING FOR "RATE" WILL MAKE YOU DO IT RIGHT THE FIRST TIME, AND AFTER YOU GET YOUR FIRST CHECK, YOU WILL DO IT RIGHT EVERYTIME....TIME IS MONEY, AND JASON I HAVE WASTED ENOUGH OF OURS.
The problem they had was low air pressure on the assemble line, and they blamed it on an old "LeRoi" air compressor. The compressor was dirty and leaked oil and they thought that "it" was at fault.
What they failed to realize was, they were working the compressor to death and not maintaining it, and that was why it leaked oil, and because it leaked oil all over itself and the dust settled on it after work it looked like a "hunk of shit".
LeRoi is one of the best compressors on the market and this was a "top of the line" when it was purchased, it needed to be maintained.
The company was going to buy a new compressor and they "thought" it would solve the problem.
The questions they needed to ask is "why" isn't the compressor keeping up?
Did this problem always exist...NO.
They could not have been more wrong, these were pencil pushing fucking neddle-dicked, pin-heads.
I told Ron Davis, the plant manager, that the problem was the leaking pneumatic tools and lines on the assembly line, he looked at me as if I was nuts, and he knew I was smart, but could not comprehend how I knew this.
Because instead of going out and hosing down beers and smoking weed and snorting speed at lunch, I stayed at the shop and planned my after noon work as not to have my head stuck in my ass.
When it was quiet, I could here the air leaks and could tell how many times the compressor turned on and off when there was NO production, let alone when 70+ plus employees were working.
FIX THE LEAKS IN THE SCREW GUNS AND THE HOSES THAT HAD BEEN RUN OVER BY THE 40,000 POUND FORKLIFT AND THE COMPRESSOR WILL HANDLE THE LOAD, JUST LIKE IT DID WHEN IT WAS NEW AND THE HOSES GUNS WERE NEW....THEY DIDN'T LEAK.
What I needed to do was find a way to prove to this asshole that I was right, hmmmm?
I tried to talk to him and he thought, WHAT DOES THIS FAG KNOW, I'M THE MANAGER.
THE REASON YOU ARE A SUPERVISOR IS BECAUSE YOU ARE YOU ARE NOT SMART ENOUGH TO ACTUALLY WORK AT ANYTHING BESIDES KISSING CORPORATE ASSES.
After weeks of re-cutting the mistakes from the assembly line, I was feed up and ready to quit.
But Jack is not going out like this, I'm going to show this asswipe what the "real" problem is...besides him being a dumb-assed nigger.
After work on the day I was ready to quit I took the main airline off the compressor and put a 4 ounce bottle of "LOCK-TITE" in the air line that feed the assembly line. Everyone was so glad to be done at the end of the day, they left all the tools plugged in to the air lines and just left. As the compressors tank leaked all the air off throughh the guns the "LOCK-TITE" got into the guns.
Lock-tite, unlike glue, seals in the absence of air.
So when the LOCK-TITE got into the inside of the screw guns it locked all of them up.
The next morning none of the tools worked on the line...but the compressor did.
Ron Davis knew I was the only one in the plant the night before and came to me and asked, "What did you do to the line."
I looked at him like the dickheads of the Bay Area look at me when I ask them about the implants....I looked at him with a bewildered look and shrugged my shoulders as if to say...WHAT?
They had the money to replace the compressor, but that was not the problem, the leaking equipment was. They went down to the air tool supplier and bought all new screw guns and hoses for the line and fired production up....guess what, NO LEAKS.!!!!!!!!!
Production was flying and Ron Davis was watching the products fly off the line. He never came over and said shit to me. Remember I was a metal saw operator and I was the guy that started the production. I kept the line supplied with just enough parts to keep production moving and at lunch I walked out and went to the bar, then went home, drunk, and never went back to work...FUCK THAT ARROGANT PUNK.
Ron Davis called me for 3 days asking me to come back to work and I told him to FUCK OFF.
He knew so much about running the company....RUN THE MOTHER FUCKER, DICKHEAD.
The week before I quit my check was $1,113.00 take home pay.
IT IS ABOUT RESPECT YOU FUCKING ARROGANT ASSHOLE, NOT MONEY.!!!!!
WHEN I TALK, YOU BETTER LISTEN...I TALK TO BE HEARD.
AND IT SHOULD BE OBVIOUS TO EVERYONE THAT I LISTENED, TO OR FOR, THE PROBLEM AND THEN THOUGHT ABOUT A SOLUTION.
GUESS WHAT?
I WAS RIGHT....AGAIN.
PAY MY SSDI CHECK YOU FUCKING ASSHOLES,
OR FIND ME A JOB, I'LL BE AT THE BAR, LMFAO.
REMEMBER THIS FROM THE FRAM COMMERCIAL:
YOU CAN PAY ME NOW...OR YOU CAN PAY ME LATER.
I FUCKING LOVE DOING THIS SHIT WHEN SOMEONE PISSES ME THE FUCK OFF, AND YOU THOUGHT I WAS ARROGANT.
YOU SHOULD HAVE HAD ME WORK FOR YOU...THINK I'M STUPID.??
SOME OF THE SMARTEST PEOPLE IN THE WORLD LIVE IN THE BAY AREA,
RIGHT MICHAEL FELL.
I KNOW DUMMY, WHY DO YOU THINK I CAME HERE.
I MAY BE ONE OF THE SMARTEST...OR ONE OF THE DUMBEST.
WHAT DO YOU THINK.??
I'M DEFINATELY THEE MOST ARROGANT.!!!!!
YOU ASSHOLES IN THE BAY AREA THOUGHT I WAS ARROGANT BEFORE....I WARNED YOUR ASSES.
THIS IS FUCKING ARROGANCE AND YOU STARTED IT.
No comments:
Post a Comment